Search results

i ask because the 1896 mauser action isnt long enough to cycle a 30-06 round through it, so it seems a far fetched claim.

what rifle using an 1896 mauser action is anyone using to chamber a 30-06?

you are correct, and as the OP mentioned he had a small ring action i figured it worth mentioning.

just an fyi, the small ring actions are not well suited for high pressure cartridges.

the twist rate wont affect cycling, but it will severely limit the bullets that will be able to be fired accurately from a .223/5.56.

depends which version your talking about, the xmark, or xmark pro adj. the first one, the xmark was a sad sorry attempt by remington to cut costs, and the results show in the product. the xmark pro adj is even worse.

just checked, mine works properly in any orientation.

them little ones are easier to drag, and taste better. you just have to kill a few of 'em.

ive found the HS stocks to be pretty decent, but even with the bedding block, they typically need to be bedded.

for rust prevention , i use "the inhibitor". ive had recievers left in the white for years in a humid basement with a light film of this stuff, and it keeps rust away.

heat. i use a hair dryer and get it very warm, then you can usually peel/pick it off metal.

gift boxed is always the deciding factor when buying optics!

firing pin protrusion is way too short, you need around .060". if in doubt use the little combo tool that comes with almost every mosin to set the firin pin, its a simple go/no-go tool and you really cant go worng using it for that rifle. too sum this up, too little pin protrusion coupled with...

do not weld on the bolt face!!!!!!!!!!!!! seriously, pierced primers is usually a result of underpressure ammunition.

the extremely low pressure is the biggest part of your problem. does it pierce primers with surplus or quality ammo? simple facts are, a good gunsmith is going to charge more than the value of the rifle for what you want done. in oyur shoes, i would first try ammunition of proper pressure, next...

they have been show to funnel funds into the hands of the anti gun movement, and that is reason enough to never use them. it has nothing to do with their online policies.... personally i think any gun owner that uses paypal or ebay should just turn in their guns because they are supporting the...

i wont discuss this with you further, no one pours abrasives into an engine to break them in. im guessing you have never looked through a bore scope.

i owuldnt say he didnt hurt anything. abrasives were fired down the bore removing steel. #1 we know for a fact that is going to move the throat forward, #2 we know that is also going to remove steel from the bore down the entire length of the barrel. quick summary is for now he didnt help or...

i tried one in a mauser a bunch of years ago, i want overly pleased with it. for me there was no happy ground with the trigger. for a funtional set trigger, the unset weight had to be higher than i cared for on a hunting rifle. if the unset was put at a reasonable pull weight, the set trigger...

hand lapping a finished barrel isnt a good idea either.