Search results

Hello Dan, PM sent. HPC

What is the problem with shipping firearms to California? mike in co Answer this question – just who are you referring to in your statement, “why should anyone outside of ca even consider dealing with such fools ??.”? burtona – you’re correct. If you’re not a dealer, the license check does...

AR Service Rifle Dimensions Goettschmooney - here are the dimensions for a Service Rifle barrel. From there you’re limited only by your imagination. Have fun. HPC

Stuart Otteson, The Bolt Action, pages 256-257 states, "Both striker energy (1/2MV²) and impulse (MV) are functions of the mass and velocity of the firing pin, but with velocity more important in the energy term since it appears to the second power. If a firing pin is lightened, velocity will...

tcombest If you haven’t fired any rounds through that barrel since the “rechambering”, please have the chamber borescoped. That will instantly reveal any chamber modifications such as rechambering. HPC

RWS BRASS 5.6x50R MAG UNPRIMED 20/BOX Try here: http://www.grafs.com/product/295305 HPC

How about the people with an unlimited budget – the USAMU? The following is from Precision Shooting – April 1995, THE U.S. ARMY MARKSMANSHIP UNIT, Part II: Rifles and Riflesmiths by John Feamster. “… USAMU tests have shown no significant difference in accuracy between barrels with the gasport...

Gas port location The standard location is 12.415" from where the extension touches the barrel or 13.040" if you use 0.625" for the tenon length. You may have to experiment with the gas port diameter, as 0.0935 may not be large enough with your small case in a larger diameter bore than the...

Items to examine Donald, You are correct in your assumption of the gas system operation and of course it also cocks the hammer. Items to look at, for you, are carrier weight, buffer weight and action spring length. You don’t mention barrel length, port diameter or location, so the items...

Anschutz/Suhl swivel Mass Shooter, I believe this is the product you're looking for: http://www.champchoice.com/detail.aspx?ID=580 Have fun, HPC

Chamfer question The chamfer is there; however the picture does not reveal the necessary detail. PM sent. HPC

Remington clearance question The bolt touching the barrel is a very real problem and should be avoided, as it will result in damage to the locking lug abutments as the bolt cams closed. This damage will subsequently reduce the locking lug engagement area over time. The pictures are of a...

That answer is not quite right Here is the real answer and one that I send to dealers on GB.com that have bad information. Dave - your answer is in the second paragraph. If you're an FFL - it takes 5 minutes to comply with the DOJ procedures and these procedures aren’t about you, but ME – to...

Apoplectic, which barrel keyholed? Reference this line: "I have since re-barreled with a 1:7 twist for 115's (The 115 Bergers Key-holed in a 1:8) and I can still throw 105's with incredible accuracy." Was this the Krieger you initially had problems with? How many rounds had you fired before...

6mm Giraffe PS article mid 90's on the 6mm HLS referenced a previous article where a real rocket scientist stated, a 14 caliber neck was required to eliminate flow turbulence with the goal of less throat erosion.

Perfect picture Hello Fred, Thank you for posting the picture and your modification. It's perfect.

52 Bolt Disassembly Tool Fred J, can you please describe the tool? Thank you.