Search results

fUNNY I agree most are X smokers. Of course it's hard to tell when they hide behind a pin name. I am a smoker and most of my shooting the last 30+ years I traveled with none smokers. I had no problem not smoking in the cars or trucks with them. I also tried not to smoke around none smokers or...

I know where your at bill, I had colon surgery earlier this year. mine had manifested to the outside also in the lymph node also. With the 6 months of chemo I'm 50% for 5 year plan. Hope everything goes well for you and your wife.

Maybe you could have moved closer to the meeting, or had the meeting after all flags were set/

Die Yes, I've used up 5 or 6 in the last 30 years. Hand dies of course. Your Bullets could be .005 different.

Bolt face Have the bolt face changed. Of all the actions I made only 6 were ppc. a good fit on a .308 bolt face will work just fine on a ppc. Oh ya I ended up opening 2 of the 6.

Sam Sam, glade to see you in the top five. Sam called me looking for a rail gun just as I was finishing the last ones I'm going to make and got the last one. I was glade to see him get it, he's a hell of a shooter and a good guy. Sorry I forgot the sheath for the knife Sam I'll get one out to...

Lube What I have seen when lubing the neck and full length sizing is a little to much on the neck can dent the shoulder. I do use carbide bushings and only lube the body, none on the shoulder or neck. Also to much or to little lube can change the dimentions of the neck. But what do I know, 32...

Bushing How much are you sizing the necks? You don't need to size anymore then .002 or .003. I'm not sure but Wilson bushing used to be soft. I would use the Redding coated if you can't do carbide. I always full length size but I never put lube on the necks. Bob Dodd

snakes How many snakes did you have to kill to make the stock?

Gov You mean like our gov. works, I'm sorry Ray but it's not that bad. How I think it should work. If it is a safety thing it should and usually is handled by the board A.S.A.P. If not it should be an agenda idem for the board. If it passes the board it should be sent out to the members by...

Changes Wilbur, I'm not sure that some members know how it works, please tell them.

Mistake Didn't anybody else show up. None of those guys can shoot

Primers Years ago federal built or rebuilt their primer dies, they edm the primer form. The problem was they didn't polish them enough and left pits in the corners, you could see on the primers. Under loads they would blow out. This is not to say that the primers you have didn't have another...

easy Go down to Wally town and buy a pair of shower slippers. I shot a .308 with one and it worked great.

Finished I just finished one. Bob Dodd

Not at me I don't want anyone at anytime with a stripped bolt or not pointing a rifle in my direction. I know for a fact that people have stripped bolts and put live rounds in their guns in the loading area. If you give just a little on the no bolt in gun someone could die. If you don't...

wrong way Dick I think your going the wrong way on the bushing for a 62 neck. I would say 59 58 57 and that should be good. It of course depend on the over all of the seated brass. I like the Redding dies I don't think the Harrels are hard maybe I'm wrong happened one time before. I would also...

Bushing I'm thinking the only way a bushing would work, is if it were as long as the block.

Bushing A bushing glued to the barrel could be one way to hold it without screwing up the bore.

I'm putting together a rail gun for a test fixture. This will be used for barreled actions smaller than we use in unlimited matches. I'm concerned about how much torch should be applied to the screws. Anyone tried this before?