Search results

Muzzle Brakes He makes those muzzle brakes himself...you can buy them off his website.

Seb Original Mine does the same thing...I'm thinking that the shaft was originally glued or locktited in and it has broken down overtime and comes loose.

1045 Johan, My JGS 1045 reamer has 0.065" freebore length. Steve

Bases Fergus I have Davidson bases on my Bat...Just use some Araldite on them...Yatesy had an accuracy problem with his Bat and it was a loose base.

I have a Winchester Model 70A with a Ruger S/S sporter barrel chambered in 30-06Ackley. I would like to fit a muzzle brake to this barrel. The diameter at the muzzle is around 0.600". Would there be a problem fitting a muzzle brake with a 1/2"x 28 thread? Thanks Steve

Benchmark 29.7 grain is the starting load and 31.6 grains is the max by tha ADI manual for Benchmark and a 70 grain projectile Steve

Amp BRT is the Australian Distributors for AMP Steve

222rem mag I think Sako is making loaded ammo and unprimed brass. Steven

22-250 1.578" Steve

Extractor The Zastava M85 uses a similar action to the early Sako...we have ordered extractors for Zastavas that fitted the Sako. Steve

howa If you cut metric threads on an imperial lathe its a good idea to lock in the half nuts and then unscrew the half nut lever...its to easy to forget and knock the half nuts out when you get to the end of the thread. Steve

Burris Peter, Check the number of clicks first....I have an early model and they are 1/8th clicks even though the turrets only have 4 graduations between the numbers. Steve

Extractor What I've found with the small bolt face Remington bolts is the extractor groove in the bolt isn't deep enough...If you take a bit of metal off the back off the extractor it makes it a lot easier to close the bolt...otherwise you will need to some how deepen the extractor groove which...

Had a call from another shooter today who had rang his local gunshop and was told the following...Nioa should have the powder ready to distribute in 6 to 8 weeks...I rang Nioa and was told the same story...there are about 4 or 5 gunshops in QLD that have it on order. Steve

Powder Andy, You will be pleased to know the powder boat has arrived. N133 should be available in QLD very soon if not already in shops. Steve

powder Chris, I think Andy's sources weren't shooting industry related...I think the boat and transport side of this thread has run it's course...From what I've heard there is a supply of N133 for the WBC. Steve

Powder Andy, Read what I said in my post...1 powder shipment per year...Nioa missed the boat...this information comes from Nioa...when I rang Nioa to ask when their shipment of Vihtavouri powder would be here I was told their order was too late to catch the powder boat which only delivers...

Powder Andy, The reason we have no Vihtavouri power in Australia at the moment is there is only one powder delivery a year from Finland and Nioa missed the boat...First Fleet was Nioa's transport company that delivered powders to us in New South Wales...Our shop had its last ADI powder...

Eddie, Had the exact same problem with a solid pilot reamer from a good brand named reamer maker in 204R...I used baking paper and wrapped it around about 3 times and soaked it in cutting oil...replaced the paper a couple of times and finally got a good finish with no chatter. Steve

Andy, That would be a mild load...I have shot it at 31.5g with a 70g projectile...didn't have time to chronograph it but it shot very well. Steve