Search results

I always had a passion for military semi-autos . "Had" all sorts. Still have a few. (The accurate Match Rifles, Ar-15, M1a, M-1 grand) I also find myself primarily firing off a bench .I never shot any competition. (have wanted to) Over time I have found only the accurate rifles are interesting...

I have a used barrel that I have no idea how it was originally set up for chambering. I would simply like to enlarge the neck and set it back a thread or so. (Curenty have a .262 neck) have a reamer with a .269 neck. The question is do I indicate the current neck area and the muzzle...

Well... whats the difference between a cat head to hold a barrel on a lathe and a spider ??? Thanks Adam

I have a B&S .0005 per line. Is this accurate enough ? Or should I be looking at getting a .0001 per line ? I need a probe extension for the B&S ($40) or I think I can get a Mikioto for around $100 for the job. Your Thoughts ? Thanks Adam

The problem was Bruno's listed a Davidson part # DW-13 that was no longer available. I called Nesika Bay Tec. service They told me a Rem. 700 wrench will work fine. Sinclair's told me a Panda wrench will work fine. I ended up going with Sinclairs. This sure makes me nervous .... I hate to...

Thanks for any help!

Ordered a ( Jackie reamer ).269 with .035 freebore . with pilots .2368 or the .2370 for my Kreiger 4 groove barrel.

Jackie, Im lost as to what freebore to select 0-.055 ? I do not have a pet bullet per say. I tend to purchase bullets in 100 box. Seams like Berger 68Gr Flat Base is easy to come by. Im just curious why Boat tails for you ?? I thought conventional wisdom was BT for long ranges and FB for...

Removable Pilot or solid ? Removable Pilot or solid ? thanks Jackie!!!

Im thinking of setting back the barrel to get a new leading edge on the chamber (currently .262). I need a finish chamber reamer any how for future barrels and would like to go to a .269 neck. I "assume" i can use a finish reamer to do this ? Removable Pilot or solid ? Thanks for any...

Who do you have that will do a re-barrel job (with barrel I assume) for $390-$425?????

For a LV 10.5lb class Benchrest rifle. 6ppc. I assume I need to stay with my current contour to make weight. I have 1.250" @ receiver (20.5" long) .920@muzzle so is this a #7 standard varmint or a #7 LV Varmint contour ? recommended twist ? recommended # of groves in rifling ? I see Brunos...

Hi Jackie, After a little digging around on the net I found a great article by YOU. Turning necks on a lathe. I guises I found something more "sophisticated" My 11" Rockwell lathe in the basement. Do you have any other articles out (or recommendation) for lathe set up for barreling work...

RCBS hand held neck turner w/mic, anyone try one? Part# 516187 Any good and if so who's expander works good with it for 6mm. link:http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=516187

Im in the market for a die set. Looking at the #36319 Redding Type -s Match Full die set (Full length bushing die and Mic seating die.) #36319 is 6mmPPC USA (is this what I need for a bench rifle .262 neck ?) I vaguely remember something about 2 different PPC case sizes ?? Anyways Redding...

Im a newbee never competed. Had fun years ago shooting a trued Remington 6PPC off the bench just for fun. Was using a Hart Base and a Howen windage adjustable top. Never understood the advantage of cranking the little knob vs just pivioting the top to get to the next target ? Im also...

Thank You Mr. Stiller!

Is for and aft play normal in a Custom action (trigger group removed and no casing in chamber) (its a used Nesika action) maby .005 movement. Any help on how to check a used action would be helpful. Thanks for any and all help ! Adam