Search results

Jim, I would ready the following Post by Barts Bullets and apply what you learn to the 6BR --- http://www.bartsbullets.com/6mm-grinch.html And I would also ask you to consider the 6BRAI ! Jerry

JGS Reamer Print Jerry- Tim S. shared a reamer print of this case and it really isn't anything more than a 6BR with a 40 deg. shoulder. You could also use a 6BR reamer and a Dasher reamer to make the chamber, which I will prob. do since I have the 6BR and want a Dasher too. So then I will...

Jim1K - have you shot this 6BR improved in a 1K match ? How did it do over three targets ? With wind or not ? Thanks for your reply - Always ready to try new stuff. Thinking I will make one of these and try it out in the west.... Jerry

Boyd and Tim, Thank you for the clarification- So does the .272 neck require one to turn the necks or is it a no turn - for me nice to have no turn .... JR

So it this then? The 6BR-DX The 6BR-DX is an improved version of the 6mm BR Norma cartridge, with a 40? shoulder and a bit less body taper than a Dasher. Thanks

Maybe PM him but the 6mm Grinch looks good too and Barts write up is with the 103's JR

Is this just a 6mm BR with a 40 deg shoulder ? Thanks for the info JR

Why yes it is-but I am interested in the first 400 yds. And Want them big as I can get them. JR

Does anyone make a large Wind Prob for 1K that can be seen at 200 to 400 Yards : JR

Bottom Eject Action I would go with The Borden RBLPBE or the Bat 3L RBLPRE in a Tracker Stock. JR

But it would be interesting to see if his solution did fix the problem ! JR

OK - I am interested in hearing what you don't like about that stock? It's too expensive to get one and let it sit in the corner. JR

The scope adds about 300 dollars to the price of the rifle. But be advised that stiller is not making the viper any longer and there is no real support for it at this time.

Donovan - thank you for your response. I agree with you that if you pined the stock it could cause problems - unless it was a dasher rnd with muzzle break. But here is why I asked the question. I looked at the Manners F-Class stock, and thought that if I buy this stock and set a record with it...

Hi alinwa - thanks for the response - But doesn't it violate rule 8. (Rifles are fired utilizing sandbag front rests, which may be supported on a pedestal that does not co-act with the sandbag to restrict upward and/or rearward movement.) And if it is OK to have this then why not design the...

CMaier - it is not the up movement I am thinking about - it is the movement to the rear. One could place the rear bag so the gun can't move at all. JR

NBRSA 1000yd Stock Question NBRSA Rule 4 state that : 4. There are no stock limitations. However, the Rest rule 8. Rifles are fired utilizing sandbag front rests, which may be supported on a pedestal that does not co-act with the sandbag to restrict upward and/or rearward movement...

My Alpine action is one of my best shooting actions --- And if this rule goes thru every one now has a ready made Drop Port...... Just need to cut that open in one of those Davis single shot blocks.... Delete Magazine cut and Magazine - Great news. JR

Again don't try to fix what isn't Broke. Very few places on the West cost (none in Az) Phoenix wont even consider it... - most anywhere on the east coast. :mad: Also, why try to fix VFS it doesn't need fix- n - and it is what attracts new shooters to BR game. 100yd is the best way to...

I would take a 1 in 8 twist or faster.... Jerry