Search results

I suspect the differential heating between the two will break the bond.

I have used diamond tipped blades in a chopsaw to cut rebar, it worked well. I doubt the skilsaw version cutting 1" plate would. I would find a bigger bandsaw. I have a Wells 8M and when I remove the factory stationary jaw and install the MAXI plate jaw I made I can cut up to 18" plate, and...

Well digging around it looks like D prefix and later (1983??) do not have the Bolt Lock feature.

Yes Bolt Lock and that is exactly what it does. So back to the question, why do some factory bolts and all my PTG bolts not have the milling cut in the bolt for thr bolt lock to engage?

Completely confused about when Rem did use bolt locks and when they didn't. Most factory bolts I have seen have them. A new factory bolt I got from PTG doesn't. None of the PTG bolts I purchased have bolt locks. Well, what is the deal? Does every install a PTG bolt discard the bolt lock, or...

Some what baffled why out of all those big game hunting rifles rifles there isn't a couple suitable as is for a young man's big game hunting rifle w/o rebarreling? Or do you just have the itch to have your gunsmith rebarrel something? How much more accuracy do you think you are going to get...

Thank you very much Justin!

The drawing I am using to build my 700 clone does not have the cocking piece slot width or depth. Judging by the width of the cocking piece of .165" I am guessing the slot is .187". Anyone have a loose 700 receiver and can give me the width of the slot and the distance from the bottom of the...

Thanks that is what I needed to know.

Yes, but do I make the major dia oversize also for full thread engagement? Or not worry about it?

1st time poster. Thought I would post over here since it is a lot of rem and Rem clone guys. I am scratchbuilding a couple of Rem clones, here if interested. http://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5611038042 Anyway, one of them I got the rough drilling for the barrel...