Search results

  1. E

    My new F-TR 308

    If you don't mind asking, why would you run DT final finish through a new Krieger?
  2. E

    A very short product demo video

    Well done...I think you should make more videos;)
  3. E

    My new to me lathe

    Your having way too much fun Butch!!!!;) Congrats
  4. E

    hands free reamer holder?

    Lee, I use a dead center to push the first half, then switch over to my hands free floater. If you wanted to run a floating pusher the whole way, make sure your handle is short enough that it doesn't hit your saddle when rotating 360 degrees. Make up a longer aluminum or steel extension to...
  5. E

    Rem 700 action with a 1.25" full bull barrel

    #4
  6. E

    Butch Lambert and coaxial top

    I just received a one of Butch's tops and can't express how nice it is. Well worth the money with no "Farley time", in fact my buddy has the farley compact and Butch's rest is nicer IMHO. On top of that Mr.Lambert is one of the kindest and most honest gentleman I have ever dealt with. So if...
  7. E

    Qctp

    replace the set screws that are in the CDCO tool holders with some quality ones. The ones that they come with are junk.
  8. E

    lapping compound

    No sense in lapping threads or crowns when you have a good lathe, proper tooling, and the knowledge to do the job correct. Now if you just want to dick around that's another story. As Jerry stated, brass screw head and Aluminum Oxide compound. Don't use silicon carbide compound as it can...
  9. E

    Gene Beggs email

    Thank You!
  10. E

    Gene Beggs email

    Is this the correct email for Mr.Beggs genebeggs@cableone.net
  11. E

    reamer stop?

    It is a wonderful product that worth it's price.
  12. E

    Theres Gotta Be A Better Way To Make Bedding Look Nice!!

    Get yourself a piece of delrin ( I used a round piece) Then get on your bench grinder and grind yourself an edge of your own design. I use a knife edge style. Then you have a tool that you can use with sufficient pressure to trim the showline edge of your bedding while the action is in the...
  13. E

    aluminum or steel bushings for Brownell's barrel vise

    Aluminum bushing and drywall paper
  14. E

    Modeling clay for bedding

    I use modeling clay and the little foam ear plugs. The ear plugs are great for little holes and other things. Just cut a small piece off compress and put in hole. It'll expand and keep the bedding out of that particular area, plus much easier to remove when done.
  15. E

    Mike Warner

    Just seen this....Prayers sent for Mike and family. I'm truly sorry for your loss of a good friend Bob. I enjoyed my few phone conversations with Mike, he was a good honest man.
  16. E

    Firing Pin Spring

    http://www.gunsprings.com/home
  17. E

    RCBS vs PACT powder dispensers/scales (as of now - most recent reviews)

    Bob Pastor is one of the finest gentlemen I have ever had the privilege of meeting and knowing. I am proud to call him one of my friends. He has built scores of world class rifles and rests. His knowledge of competitive reloading is also unsurpassed. The walls of his reloading room are covered...
  18. E

    Lathes

    That's it.......if I only hit the Mega Millions, I'd have one....or two!
  19. E

    6.5 Creedmoor Reamer

    Call Dave at PTG and tell him what you want and give him your CC info.
  20. E

    Grizzly Rod upgrade

    Man, I never knew three little 5/16ths ball bearings would cause this much static.....I liked the fix and thought somebody may be able to use it. Thanks for the input and Trig calculation WSnyder, it's not the first time I have gotten some real value from one of your posts/contributions. I...
Back
Top