Search results

target rifle in a rest, maybe 1 in 10 , on bolt closing does not set trigger, recent development so what do i adjust first ?? pull weight , sear engagement///?????/ sear is not staying in the engaged position help

zero nada and they had 350 shooters the other day

this was a major brain phart...i used sie 175 mk not the correct berger 175 vld's will try correctly shortly!

41 and 43 are commercial milspec primers. i have shot both and in my opinion they are not part of precision rifle shooting. i use cc1 br's and 450, fed 205 205m 210 210 m 215 215m....some tulas and no friend of the ar primers either

ohh loook a spammer or a mouthpeice... either way no other sport uses different goals ..not football, not basketball, not any sport... just some whinners that want to rule in their win

gentlemen, i have identified the problem area. IT IS THE BRASS, this is 5x6x adg 300 wsm with a new fitted extractor from jim borden, i have the same issue, some brass locks the bolt less than 1/4 turn. norma brass, fired sized and loaded does cycle. new adg brass cycles. so i will reassemble...

me thinks you are asking in the wrong place. sounds like an high power or f class rifle question. consider accurateshooter.com or..i think th ecmp/dcm has a site. i have both a 27 and a 26 inch. the 27 was a high power, and the 26 is a benchrest..both in ar's

THEM PSUEDO tx's boys bite easy

we got a nice group of gentlemen coming up from AZ,

yes except the ejector is strong..really have to hold on tight.

less than .001 diff( my calipers read .0005..that is what i see) no to profile i am thinking more extractor filtting is required. i have mine just below the edge of the bolt, but my brm with 308 bolt the extractor is noticeably below the bolt edge. just holding my breath and waiting for jim (...

not exactly true the extractor issue was much later... and i was waiting for jim to get back to me. not one person in the thread mentioned a new extractor REQUIRED fitting. the cone rub shot was part of the fitting process. do not get me wrong, i asked for help and most was help..some was not...

so a big jump forward. over 200 rounds thru the number 1 rifle(described above). dies are complete. a used early LRB stock was found and reworked. got a borden brm and a 1.25 30" bbl chambered by GO again. it is all together and i have gone from rifle 1 onto rifle number 2. i had little luck in...

excuse me but ii clearly stated in the very begining that this was a WORKING national champion RIFLE that had a brass size issue.....lost the oem extractor doing a suggested investigation. the new extractor required fitting, jim forgot to tell me..he has been in and out of the hospital..with...

that is how i lost the first extractor..... if i had to guess i would say an extractor issue. it is the only part replaced from a previously working rifle. i got it to close ..but then it stops closing and not sure what to look for... come over and look 99th and bell) i will go backwards and...

i only have calipers with that narrow of blade. maybe .0005 dif on dia....is groove width an issue... ?? thanks

gentlemen, i need some help ( some say that aint news!) i lost and replaced the extractor on my brmxd bolt. but then discovered its a 'FITTED" part. so with a small file in hand i slowly filed and check fit the extractor to the chamber. finally it extracts with no rub on the face of the cone...

yep might work at 50 yards but generally i pass on 36x

i am having no issue