W
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Butch Lambert
Active member
Probably not any more than you found on the other forums.
Good Luck
Good Luck
E
eww1350
Guest
My guess is that it was installed on the date 12/1984 and it is a .338 bore with a 1-10 twist....serial number (of the action) 5714...
Butch Lambert
Active member
Eddie,
You guess right except for the 5714.
You guess right except for the 5714.
W
wadebrown
Guest
5714 Reamer Number??
martin zuck
Member
Possibly an unknown gunsmith using a XX Douglas barrel?
W
whitedogone
Guest
So all the markings were done by the smith? I guess I just wanted to know if there is a "standard" way to mark them, and if anything at all was put on be the manufactuers.
B
Bill Ohio
Guest
So all the markings were done by the smith? I guess I just wanted to know if there is a "standard" way to mark them, and if anything at all was put on be the manufactuers.
I have barrels that are unmarked, some that are marked with little more than a scratch awl/electric pencil, and others that are stamped. Factory-installed OEM barrels will be marked. Others, it's up to the installer. Me, I'd always appreciate knowing what the barrel was chambered to fit.