Wax on, Wax off
- Thread starter Bob1949
- Start date
Bob1949
Member
I’ve been using alcohol, denatured that is, with good results but I’m running out.
So down in the garage I found the WD40 and thought to give it a try.
But, as far as you know, will the WD do any harm to the barrel?
After de-waxing I would, of course, finish up with solvent and oiling.
Bob
So down in the garage I found the WD40 and thought to give it a try.
But, as far as you know, will the WD do any harm to the barrel?
After de-waxing I would, of course, finish up with solvent and oiling.
Bob
Last edited:
O
orbitup
Guest
Leave the WD-40 in the garage. I would rather use Windex.
Pete Wass
Well-known member
Buy ya some Patch out
and you won't ever have to look back. Unlike a lot of others who seem to be AR, I report on whatever I find that works. It's been a long road because of the AR folks but the Sharpshooter Supply folks sure seem to have the gun cleanin chemical thing figured out.
Pete
and you won't ever have to look back. Unlike a lot of others who seem to be AR, I report on whatever I find that works. It's been a long road because of the AR folks but the Sharpshooter Supply folks sure seem to have the gun cleanin chemical thing figured out.
Pete
Bob1949
Member
Fellows, I appreciate all the input. It seems nobody recommends the WD.
I’m heading down to the local pharmacy to get some more alcohol, as I have found, it cuts the wax very well.
I’ve been using “ Tetra Gun” solvent, for regular cleaning, it was recommended by my local gun shop, its always done a good job for me.
The thing is I didn’t want to use a lot of the Tetra just to get the wax out first.
Bob
I’m heading down to the local pharmacy to get some more alcohol, as I have found, it cuts the wax very well.
I’ve been using “ Tetra Gun” solvent, for regular cleaning, it was recommended by my local gun shop, its always done a good job for me.
The thing is I didn’t want to use a lot of the Tetra just to get the wax out first.
Bob
Pete Wass
Well-known member
Lots of things work, marginally
1. without a borescope, it's next to impossible to know if one has their barrel clean.
2. some stuff works a lot better than others.
3. don't wear your barrel out with the cleaning rod. Get ya something that works fast.
4. It's a lot easier to duplicate something one knows for sure, like thoroughly clean vs half or more dirty.
5. Throat carbon is a bigger enemy than wax.
6. Lead, if your barrel attracts it, and many do, is the biggest enemy of all.
7. yes, there is an excellent, fast acting , liquid lead remover.
the advice is worth what it costs to someone.
Pete
1. without a borescope, it's next to impossible to know if one has their barrel clean.
2. some stuff works a lot better than others.
3. don't wear your barrel out with the cleaning rod. Get ya something that works fast.
4. It's a lot easier to duplicate something one knows for sure, like thoroughly clean vs half or more dirty.
5. Throat carbon is a bigger enemy than wax.
6. Lead, if your barrel attracts it, and many do, is the biggest enemy of all.
7. yes, there is an excellent, fast acting , liquid lead remover.
the advice is worth what it costs to someone.
Pete
Bob Smeltzer
Member
I use Butchs Bore Shine and it take the wax and copper!
Bob Smeltzer
Member
whatever