Tubal 3000 for 6 BR ?

E

eggman

New member
I cannot find very much load data for Tubal 3000 and I was hoping someone on this forum may have some experience with this powder and the 6 BR using 105 gr-107 gr. bullets . I've used tu-3000 some in a 6 PPC but don't have a good feel for it even in this cartridge.

Thanks,
Rodney
 
Probably a little too hot for those heavy bullets. If you are determined to try it, start low, about 29 gr. Better powder may be Varget, or 4350.
 
Thanks Larry , you are thinking just what I suspected and I think I'll just keep trying it in the 6 PPC and see if I can find what will work.

Rodney
 
28.0 to 29.6 grains in a 6 ppc is pretty good with 68 bulllets. I used 28.5 with the bullet .012 into the lands a lot with good luck.
 
Thanks Jerry . I did notice I had better results with the Tu-3000 in the PPC with 68 gr. bullets vs lighter bullets and I remember my sweet spot was around 28.5 grs .

Rodney
 
You must log in or register to reply here.
Back
Top