Torque wrench for action and barrel screw.

M

model14

Guest
I want to keep the same torque on my action screws and barrel tension screw on my newly purchased Win 52B Sporter. I need to purchase a small torque wrench but I have no idea what range I should purchase. Anyone out there able to give me a ballpark range I should be looking at?
Thanks,
Richard
 
Torque wrench for action

A recent writing on this was published not long ago.
Usually it's in the 45 to 65 inch pounds range as i remember.
I hope this helps you some what.
 
Torque wrench for action

A recent writing on this was published not long ago.
Usually it's in the 45 to 65 inch pounds range as i remember on the action.
I hope this helps you some what.
 
wrench

Use allan head screw's, and a long handled allan wrench. You soon will be able to check by feel, plus save a lot of money
 
I have (And like) Brownells Magna-Tip Torque Handle. A bit more expensive than others (Utica for example), but it also has a larger adjustment range- 10 - 70 inch pounds in 1 inch increments. Easy to adjust, easy to read, easy to use.

Cheers,

Mark
 
You must log in or register to reply here.
Back
Top