T
toklat
Guest
Looking for advice on good mounts and rings . I have used Burris and have hade good luck. Just bught a new rifle in 22-250 and would liket to put a good set of mounts and rings on it. Any thoughts?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
N
nhkuehl
Guest
I like to use a one piece (for rigidity) windage base so that I can optically center my scope and then bore sight for windage with the windage screws. I've been using Leupold bases and rings (Burris are fine). I wanted to put a 20 MOA base on a Savage and had to use a picatinny rail with no windage adjustment so I used Burris Zee rings and Posi-Align inserts and used a .005" insert to bore sight for windage. With the Burris inserts you don't have to lap and bed your rings. - nhk
D
david dumas
Guest
Talley Mfg Co,,,,,,,,,,Santee SC, nice rings & base's,,,,,,, great people to deal with!!!!!!!
the wind is my friend,,,,,,,,,,,
DD
the wind is my friend,,,,,,,,,,,
DD
Kevin Ballowe
Member
I have mostly Leupold and Burris and I like them.
P
P Corncob Bob
Guest
I like Davidson bases and Kelbly rings, available through Sinclair.
Available for Remington 700 and 40X and Browning A-bolt.
Old Cob
Available for Remington 700 and 40X and Browning A-bolt.
Old Cob