Model 37 Remington

L

Larry Wilkins

Guest
OK people, how do you remove the bolt on this great gun. Had it for years and thought I would give it a good cleaning.

Cheers

Larry Wilkins
Chico Ca
 
Early models are removed by just pulling on back on the trigger,later ones by pulling back on the trigger and at the same time depressing the bolt stop through a hole in the ejector with a small punch.
 
Basically what vicki said... You will need a small diameter probe. I use a small allen wrench.

I have a single shot adapted model 37. To remove the bolt I:

1. Open up the action as if for loading.
2. Looking down into the action, I insert the allen wrench probe into the small hole I see and press down.
3. While holding the probe down, I pull back on the trigger and slide the bolt out.

While this may sound like a three handed procedure, I am able to remove my bolt with my one and only usable hand.
 
You must log in or register to reply here.
Back
Top