H
HP Drifter
Guest
Wanting to find a midwest supplier for some 3/16" lead wire for bullet making if possible. Just wondering where does everyone source their bulletmaking lead. TIA.
G
Gerry
Guest
looking for lead wire
check your local phone book first. the shipping will break you back, unless you go by the hundred weight by truck transport.
Lead prices are way up.
If you can get some pure lead you can opt to cast and swage your cores.
You will get some waste from the bleed off and you could melt it down and cast a rough core to swage to weight.
check your local phone book first. the shipping will break you back, unless you go by the hundred weight by truck transport.
Lead prices are way up.
If you can get some pure lead you can opt to cast and swage your cores.
You will get some waste from the bleed off and you could melt it down and cast a rough core to swage to weight.
G
george ulrich
Guest
crown metal co. milw. wi. 414 384 6500 if you need others email me.
RL Weikart
Member
Laed Wire
The last roll of lead wire I got was from Lester Bruno, you might check with him.
The last roll of lead wire I got was from Lester Bruno, you might check with him.
Mike Bryant
Active member
The last lead wire I bought came from Mayco Industries in Birmingham, AL. I used to buy from Berger, but they no longer sell lead wire and Mayco was one of the suppliers that they had on their list. There were about 3 or 4 others on their list as well.
MColeman
Club Coordinator
I think Charlie Hood is supplying cores, isn't he?