tonykharper
Well-known member
Does anyone know if the JJ Loh front rest can be easily modified to accept rest tops like those used on the Fulgham rests.
TKH
TKH
Last edited:
Does anyone know if the JJ Loh front rest can be easily modified to accept rest tops like those used on the Fulgham rests.
TKH
Hello Tony, Not familiar with those tops (personally) but I would imagine that if you could put at least 2 of these 4 holes into the tops you wanted to use it may work, But if you were wanting to use the posts as well then it would be a little more effort. This is the top of the JJ post and the bag plate, Thanks....J
Yes it all moves with the windage knob, Here is a pic of the unit more exposed hopefully this helps...JJay,
Thank you for your response.
Does the entire center section, top plate, and post and wheel move when you dial the windage knob?
If so this will be pretty easy. The Fulghums bag trays just screw on to a plate with thumb screws.
It looks like all I would need to do is make a plate to fit the Fulghum trays and screw it on top of the existing JJ top plate.
I could then swap out the Fulghum 3 inch, and 2 1/4 bag trays and never need to mess with any of the movement mechanism.
Does this sound right?
TKH
Yes it all moves with the windage knob, Here is a pic of the unit more exposed hopefully this helps...J
Jay,
Thank you, you have been very helpful.
TKH