Arbor press


It's ok I will try in first time with the .260'' Bushing and I will soon to test my news loads and I tell us...

For the resizing my cases firformed in my chamber (Reamer JGS N° 1261 6MM PPC SAKO; Neck .270'' )

I was chosen the FORSTER Bump Die Bushing Precision Plus (with using REDDING Shell Holder Competition to adjust the Head Peace)

What do you think of this choice of die ? It 's good BR die for beginning ?

A+
Laurent
 
Above you indicated the loaded round mics 0.264" at the neck. Then in your last post you said the reamer has a 0.270" neck. Is that correct? I ask because 0.006" is a lot of clearance for the PPC.

-Lee
www.singleactions.com
 
Lee Martin said:
Above you indicated the loaded round mics 0.264" at the neck. Then in your last post you said the reamer has a 0.270" neck. Is that correct? I ask because 0.006" is a lot of clearance for the PPC.

-Lee
www.singleactions.com
Click to expand...

Yes Lee Martin is right!

Let me explain! I use two cases in my chamber (Reamer JGS N° 1261 6MM PPC SAKO; Neck .270'' ) :


-NORMA case ( Factory to use "No Turn Neck!") yes is right the loaded round mics 0.264" at the neck! The clearance is to much about .006''!

-LAPUA .220 Russian, with my Neck .270'' I turn the LAPUA Neck to have the loaded mics .268'' and with those LAPUA cases the clearance is good!

I can see between this two clearances what cases work well in accuracy...

A+
Laurent.
 
Got the arbor press back from Hart & co. Cost me $35.00 for the repair plus shipping. Speaking of shipping, with the original shipping plus the back and forth for the repair, I've got $48.00 invested in shipping for this $200 arbor press. So if I sold it for $200 I'd be losing money. Gotta be a better way to do business.
 
You must log in or register to reply here.
Back
Top