Search results

Columbium (Cb) is an older name for Niobium (Nb).

Primers are packed to prevent mass detonation. The temperature inside an ammo can will be pretty far from uniform in a fire. There should be no real chance of a mass detonation.

Never had a problem with coated Dewey rods. Use a bore guide and a correctly sized and thickness patch.

Some of the smaller bench top style are not all that pricey. There are so many things you can do with even a smaller say 8 inch x 24 inch. For smaller shaft style items you can often limp with a floor mounted drill press. Rig up a bearing on the table to hold the off end of water you are...

Now THAT is worth a good laugh.

It would only take a few minutes on a metal lathe to make a replacement seating stem piece to your choice of contact points.

At least some of it will come down to how you decide what is a "factory rifle." Is a rifle with a Panda action a 'factory rifle.'

Have you put a piece of shot (7-1/2 works well) under the set screw? That small piece of lead works very well.

Agree completely. Bondhus is nice and consistent. And not a lot of money for a set and a plastic keeper. Pays to shop around. $8 to around $25 for a set. Shorter sets are less expensive, and most com with ball ends on the long side. Very handy in crowded places.

Fill the holes and drill over. Simply screwing in a plug usually works fine. If there is ANY overlap with the desired new hole location be sure to use a center drill for the initial drilling of the 'new' hole. You want a ridged drill that will not be pulled off by the possible difference in...

You use the end that gives better clearance around the socket. Using the short end can get you increased leverage. The entire wrench is heat treated for hardness. If the wrench or recess are not correctly hardened you will quickly damage the softer piece.

I put parts for a die in the box with the die. Keeps everything together.

WIKI "groundhog (Marmota monax), also known as a woodchuck" They stand up and look around when they hear a whistle. I use a police whistle when I have the gun on one that is munching. Blow, then fire on the standing target. And they love soybeans and will eat the beans and the rest of the plant.

Looks like you hit the decapping stem. screw it out further, or remove it entirely.

standard screw threads https://www.engineeringtoolbox.com/unified-screw-threads-unc-unf-d_1809.html #5-40 is UNC #5-44 is UNF...

The problem with a set screw into threads is that it typically ruin the threads in short order. Small changes in the thread position cannot be made. A pellet of 7-1/2 shot down the set screw hole goes a long way towards protecting the threads from damage. With undamaged threads you can make...

40 degree shoulders are all but impossible to move to any significant degree. It took a charge of powder to create them.You will never deliver that much force to even nudge them back. OliveOil gave a nice detailed explanation.

Good to know. I have never dealt with anyone at Jewell Trigger. A long time ago I purchased the Jewell BR trigger that is on my Varmint Rifle. I had used a Timney for a few months, and was looking for something better. I had developed a great load and the Panda action (Shilen Tube) was giving...

Any word on the impact to the business?

https://www.bluebookofgunvalues.com/#/Index