Search results

What do you use to clean the fluted part of the bolt? I had some grime in there and put some wipe out on it. That was mis-stake as it settled really corroded looking. I was able to wipe most of it out but still looks grimy. thanks for any suggestions.

I am curios of the equipment and skills needed as a beginner. I can change barrels and triggers out on my benchrest rifle, so beyond that i would have very little background in this area. What major pieces of equipment are needed and what is the approximate cost? Any recommended brands or where...

I am installing a new B&A trigger on a new Bat 3L and am running into a similar issue. The trigger is right up against one side of the trigger guard. Any suggestions on a fix, if any? thanks

As a rookie to short range BR, am I better off either: 1. Shooting at as as many club and registered Benchrest matches as possible? OR 2. Shooting at a regular club by myself as much as possible and occasionally attending a club or registered Benchrest match? thanks

I've decided to stick with a similar setup so I am in search of a BAT 3L with a PPC bolt face. A few questions: 1. What is the significance of the "body shape" listed on the BAT spec sheet? Is the 1.350 Round the one I want for short range bench rest with the PPC? 2. Do the BAT 3 Ls come with...

Problem resolved. Thanks to Chris Harris for a new set of screws.

I spoke with Chris Harris and he said that he would send me replacement screws. Nice guy.

Action is Stainless Steel and they do appear to be 6-32 socket head cap screws. One of them looks stripped, maybe both. Where can I find a replacement? Local Ace Hardware did not have that type or size. thanks

i can get one of the screws to tighten in the rear. that same screw will not tighten in the front. im at a loss

All the more reason to have a "backup"? Probably better off calling BAT or just rolling with one screw...

any chance the screws could be stripped? I can get 1 screw to tighten in the rear hole but not the other screw. neither will tighten on the forward hole. Thanks

its a Scoville stock and the forward screw is a little tricky to get lined up right. I even removed the hanger and trigger and just tried getting the screw to catch (using both screws on the forward hole) and it will not catch.

no

Reinstalling the trigger hanger and I cannot get the forward (closest to chamber) screw to catch. The hanger is 0 to 30 with 0 forward. Bat 3L Any tips? Thanks

This has all been very helpful advice. I'm probably leaning towards opening up to the flexibility of a PPC/BR action for the opportunity to shoot IBS targets with a 30BR. Do these actions offer that flexibility? I know that BAT does. I'm not sure that Marsh does.

I have read good things about the Borden. Any particular Borden setup that is preferred?

Why isn't a Kelbley Panda on your list? my experience, or lack thereof :) added. thanks

I am new to short range benchrest within the past year. I bought a used Bat 3L and Scoville stock and am ready to think about the next rig. Any opinions on actions would be helpful given what I already have and I would prefer to buy once/cry once :) At this point I am leaning toward a Terry...

thanks. yeah I figured it out as I need to turn the handle more that I expected. Nice little press though.

thanks. my problem is that I cannot get the height adjustment to move at all. It came with no instructions and the height is set at a low point. How do I move it up?