Search results

It’s ain’t no hype, I own one and it hangs with my Panda 6ppc in terms of accuracy with moderately quality ammo. I’m gonna invest in bot lapua and eley lit testing in the next few months but my Vudoo will shoot .2-.3 at 50 all day long with SK ammo it will shoot the flat nosed match .1 at 50 I...

The rifle is unique at the very least... the bolt is a tri lug it is made from Stainless the locking lug sleeve is made from 4340 and the rest is 7076 aluminum... it is just thrown together for now it will shed some weight clean up some bumps and scrapes prolly polish the whole thing and make a...

I am going to be there should get into H-ville late tomorrow night... I have a brand spanking new Nightforce 12-42x that I am going to have to sight in... I just got it mounted and the retical leveled. I loaded about 200 (most in virgin brass) at 49gr and using the 142 SMK just off the land's...

My dad and I have put together a new rifle. The barrel is a 32" 1.25 straight kreiger. I started loading lapua brass with H4350 at 46 grains, I went up in .5 grain increments until reaching 49.5 grains. I was shooting 142 smk's. We started out at 400 yards with a leupold br36x My first group...

Has the octogon barrel pretty rifle... Just got it and bought 3 boxes of ammo and some bullet's to load with. Here is my question load data is scarce for the 325 wsm What powders tend to work best with the wsm's the slow ones like H1000 or the med mag like 4350? Is this the equal to the 8 mm...

I shot it today I was pretty happy with the results I lost 90 fps I took nearly 6" off of it and my groups avg 1/2 to 3/4 so I am now going to develop the load the base line I used was 26.5 gr n135 with the sierria 1410 52 gr smk bt lapua brass with fed gmm 205 primer avg vel was 3390 with a...

Well.... I took the rifle ( A brand new remington 700 SPS V ) And put the 4 jaw on and indicated the OD of the barrel and the action assembled the moved the in ID of the Barrel had it running out just under .001" So I decided to go ahead and part the barrel I cut it off at 21" so then I...

142 berger's and a healthy dose of 4350 seat it long and keep it clean should shoot like a lazer beam;)

I was going to cut from inside out that always leaves the best finish... The head stock on my lathe should allow for a 20" barrel. What do you guy's say about a 20.5" barrel length for a 223 rem. If my memory is correct it burns all the powder in 20" so the way I see it, It is a waste to have...

I was thinking about cutting my new 26" remington 700 sps V down to 20" I know what a pain it can be breaking the barrel loose. How adverse would it be to leave the action on the barrel while I indicate and part and re- crown the barrel? Have any of you done this? I have also seen these hack...

I shot it today and it shot great shot cheap ol' remington yellow jackets fed. champion agulia sub sonic sniper all under 1 inch @ 75 yds. open sights I am very happy with it and would highly reccomend one

Just got one and it seems it is going to be a shooter. Don't know much about it model M70 1" bull barrel 24" long lyman/anschutz style globe sights

varget 50 grains as long as you can seat the bullet where it still will cycle in the mag. if you are talking bolt guns. imr 4895 47 grns. = 2700 fps is a good one 2 h1000 60 grns. not in the book may be online some where is a good one I like slow mag powder in the 06 fed brass 210 fedgmm...

I stumbled on to this and it shoots great... 83 grns H1000 fed 215 mag primer fed brass 155 berger vld match it shoots one hole under .250 in my 700pss. 83-85 h1000 not in the book but no signs of pressure.:cool:

Also what powder are you using VV or Hodgen 47.9 grns. is pretty heavy I don't see how you get that much in the case.... unless it is a fine grain powder.

Where are you guys seatting your bullet? Off the lands or in the grooves? Are you using a short or long action? Can a 260 seated long fit in the mag well? Also what dia. nect and are you using a long throat?