Search results

Thank's Bob..thats great news!

Just received my 150 from J&G sales and found it will not extract anything...(After bolt was cleaned and lubed). I removed the extractor and follower and found the follower spring much shorter. I stretched the springs and now have extraction with most amo. Wolf Match firmly engages the rifleing...

The diagram of the reamer size at this location indicates .2435 the bullet diameter measures .2433 I hope its not the reamer with a size issue .....(unlikely) A little further investigating I found that I do not have this issue with a Bart's bullet (.2430/.2431) The Burger I was using...

Thanks Gentlemen , Jackie as far as im concerned "you" are the Founding Father of .269 and its merits. adam

benchrest prototypes I e-mailed you on these and was told "not an option" Also what is the difference with it ? adam

Rifle All re-assembled, New Brass prepped . I loaded a bullet into a dummy round out far and I get the typical rifling land contact marks on the bullet. I also have a small contact line almost connecting each rifling mark. (running around the circumference ) Im thinking maby I should do a...

Slightly more for the stiller due to needing a trigger. But it will be new and can get replacement parts. Your thoughts ? Thanks Adam

O dear....not what I was hoping to hear..... Thanks for the response though.

anyone receive one from them ? J&G is in Prescott AZ. Thanks Adam

Thanks everyone, For sure the bolt shroud is one (hopefully all) the issue. Adam

Im curious about my Well used Nesika J action. Should I be able to operate the bolt (no amo) without holding or manipulating the rifle to keep it steady. (I noticed without the firing assembly its effortless,also with amo if the shoulder is correct) The aluminum end cap that rotates on the...

Im new to tuners....Came with the used rifle..Never had one before and I am tempted to chuck it. One more item to complicate the delicate balance but I guess Ill try. I have no known good load yet. Should I remove it and find "the" load and re-install ? Whats a good starting setting and how...

The case issue sounds like a common thing, just not something Ive heard about. Kinda funny. The case lube also sound like a good idea.--THANKS-- Im wondering about galled locking lugs . What do they look like and what problems do they cause ? My well used action has circular lines on the...

I purchased a tool to remove my firing pin (Nieska J action). Oil the pin ,spring ect ????

.220 Russian expanded up to 6mm (not fireformed yet). Most of the brass is real hard to close the bolt on ???? The "Go" gauge chambers normal. Setting the shoulder back ever so slightly fixes it. Should I be concerned ? Thanks for any replies .. Adam

I have a lathe and need bushings (for 6ppc Redding die)....Seams like a simple silly thing not to make. I have new un-used Redding Coated.256/.257/.258 That I cannot exchange (I need ..265./.266...anyone want to trade 3 for 2?) Anyhow I noticed the production bushings are hardened. Is...

I knew I would get some entertaining answers ! Pencil sharpener ...still chuckling... I was almost afraid to ask ! Yes I was asking a tenth of a thousandth . I was surprised no one equated anything to the tides or ????? Thanks I get the drift. Adam

I had maby 6 out of 100 for what ever the reason that mic this slight amount under size. Chuck them in with the with the rest or segregate ? Can .0001 influence group accuracy ? Thanks Adam

I purchased a reamer with .035 freeboar (6ppc) with the understanding that it is a good choice for Barts 68gr BT in particular and it being a overall flexible dimension for other bullet makers. The Question is with the bullet touching the lands I have about .180 into the neck to hold it. Is...

Thanks Guys. Jerry the grade 8 bolt worked great! adam