Search results

lilabner clowdis as well as Dan is, but I can take the seated depth one further, if you are to seat the bullets into necks that are of .0005 to .001 neck tension (not for hunting) then seat those bullets .020 longer than the lands, the chamber will seat those bullets for you (if you have a good...

westy: The work effort WILL show to those that are in the know, I would recommend just one small addition to the True-Oil and that is of the use of Marine Spar Varnish as grain filler, makes the wood come to life. Clarence

neil: I would use the 45 degree as I have seen additional TIR when using the VLD tool, the difference is .0005 TIR with the 45 and .002 for the VLD tool. Remember if (Sierra 168) stay undert 800 with it. Clarence

brian: I will look at the off side of the pin cam and see if I can find some contact, if so I'll adjust from there, your input is appreciated, as I could not see contact on the sleeve. Clarence

Brian: Need to reshape the Pin nose to a browder print on the case plus add extra protrusion to .013, however one would not want to stop the Pin on the Cam Ramp bottom. Clarence

Thought so, but I also need to see how much I might cut off and what the clearence is needed at the ramp/sear Clarence

I just got an Anschutz Match 54 form the older Brother and need to change the firing pin strike, the question is does the COLLAR for spring retention stop the foreward movement of the Pin? Clarence edited to fix the stupid spelling

Travis: Look for a Paco Kelley and his swaging tools for the rimfire round, it fixes most of the problems except for the Cylinder to Barrel alignment which is not a real problem to fix. I have an old flat that will shoot arround an inch at 25 yds from sitting. Clarence