Tuner/Brake Combo?

[John S]

Looking for a Tuner/Brake combo 30 cal. 5/8 - 24

I have found one made by Cortina Precision.

Is there any others I should look at?

Thank you.

 

[rsmithsr]

Looking for a Tuner/Brake combo 30 cal. 5/8 - 24

I have found one made by Cortina Precision.

Is there any others I should look at?

Thank you.

5/8 is too thin of a wall on a real 30

 

[John S]

5/8 is too thin of a wall on a real 30

Is a .308 a real .30 cal?

 

[Steelhead1]

Harrells makes a pretty nice tuner/brake. I just purchased one but have not used it yet, and it’s for a 6.5 Grendel, factory rifle. Don’t listen to those that say 5/8x24 is not enough barrel diameter! If that was the case Browning would not have used them on hunting rifles. They work.

 

[Richard]

Not saying 5/8x24 won't work

but 3/4x24 is better.

Use a deltronic pin and you will see the difference on a 30 cal

Richard

 

[rsmithsr]

what he said.
thin at the neck is a bad thing
3/4 is good

 

[rsmithsr]

browning makes consumer rifles for hunting, not sniper rifles nor target rifles.

Harrells makes a pretty nice tuner/brake. I just purchased one but have not used it yet, and it’s for a 6.5 Grendel, factory rifle. Don’t listen to those that say 5/8x24 is not enough barrel diameter! If that was the case Browning would not have used them on hunting rifles. They work.

 

[alinwa]

If it's an accuracy setup, getting a tuner brake to not shake is really hard. IMO the Harrell's concept is solid....... start with a proven brake design, have it installed by someone competent to lock it on. Add tuning rings. Solid.

 

[Richard]

This is what has

worked best for me.

I thread behind the brake for a loker tuner, and thread the front for the brake. Tunes great on my long range stuff.

Richard

 

[Richard]

A pic with the tuner/brake combo on a 300 PRC