Tenon length on a Nesika Model T action.

[Rewinder]

Tenon length on a Nesika Model T action, Poulous, Wa. Manufacture. 1.06 x 18 x length.

 

[mwezell]

Tenon length on a Nesika Model T action, Poulous, Wa. Manufacture. 1.06 x 18 x length.
Trying to find out if I could take off my HV barrel off and put it on my Kelbly Panda.1.06 x 18 x 1.115
Not a lot of info on the Nesika barrel tenon specs.
Never mind. Pull the barrel off and measured the Tenon. Didn't want to but just had to do it.

The TPE I think is .900 long, as are the Borden B and BR..and I think others. Is that what you found on your T? I think Borden has spacers to use a Panda bbl on it if that's the case. Just double check HS and tenon or call Jim. Might come in handy.

 

[Ian_Owen]

The Nesika J was 0.965, which is the same as the TPE.
I think the T is the same as the J but not sure