Butch Lambert
Active member
posted Mar 22, 7:56 AM Hide Post
swapMeet Logo
SATURDAY, April 14, 2018 - 8am - 2pm
**NEW ADDRESS** 2501 North Interstate Highway 45
ENNIS, TX 75119
ANYONE CAN SET UP A TABLE
OR PULL UP AND DROP YOUR TAILGATE.
NO ENTRY FEE!
(No jewelry or beef jerky please)
Shilen will provide a complimentary lunch, for this reason please call/email if you plan on attending so we can have a rough head count.
Machines will run from 8am and llam so you can see barrel making in process.
If you want to get rid of something or pick up something specific let us know and we will add you to the list of vendors below.
(See below)
Call: 972-875-5318
Fax: 972-875-5402
comments@shilen.com
VENDOR LIST / ATTENDEES
Shilen
Swap meet barrels.
Richard
Gunsmith lathe – 12”x 36” Craftsman (not at meet but have pictures and video) Gunsmith mill – Index – Full size – 9”x 42” table travel (not at meet but have pictures and video)
Complete Rifles, actions, mags. bullet castings
Jim
S&W pistols, rifles, other treasures
Blake
Supressors
Scott
22RF barrels, tuners and more
-->
Multiple guys and companies will be there.
A buddy is bringing his bullet making table with 3 bullet presses mounted on it, carbide dies, core cutter, pointup dies,squirt die for cores, and other things that you need for 6mm bullets. These were making the Shilen BR bullets in years past.
Also 2 or 3 New Hermes engravers will be there with fonts..
swapMeet Logo
SATURDAY, April 14, 2018 - 8am - 2pm
**NEW ADDRESS** 2501 North Interstate Highway 45
ENNIS, TX 75119
ANYONE CAN SET UP A TABLE
OR PULL UP AND DROP YOUR TAILGATE.
NO ENTRY FEE!
(No jewelry or beef jerky please)
Shilen will provide a complimentary lunch, for this reason please call/email if you plan on attending so we can have a rough head count.
Machines will run from 8am and llam so you can see barrel making in process.
If you want to get rid of something or pick up something specific let us know and we will add you to the list of vendors below.
(See below)
Call: 972-875-5318
Fax: 972-875-5402
comments@shilen.com
VENDOR LIST / ATTENDEES
Shilen
Swap meet barrels.
Richard
Gunsmith lathe – 12”x 36” Craftsman (not at meet but have pictures and video) Gunsmith mill – Index – Full size – 9”x 42” table travel (not at meet but have pictures and video)
Complete Rifles, actions, mags. bullet castings
Jim
S&W pistols, rifles, other treasures
Blake
Supressors
Scott
22RF barrels, tuners and more
-->
Multiple guys and companies will be there.
A buddy is bringing his bullet making table with 3 bullet presses mounted on it, carbide dies, core cutter, pointup dies,squirt die for cores, and other things that you need for 6mm bullets. These were making the Shilen BR bullets in years past.
Also 2 or 3 New Hermes engravers will be there with fonts..