Remington riveted extactor

D

D. E. Laneer

New member
Does anyone have a source for Remington riveted extractors?
I have a friend with a like new Rem. 700 7MM Express and he does not want to alter the bolt with a Sako
or other extractor.

Thanks
 
Brownells 641 623 4000 is chronically out of stock so
Jack First 605 343 9544
Poppert's 215 887 2391
Wisner's 360 748 4590
Outback 812 945 0480

will have them
 
I got the last one from Midway,

Meant to say, the last one I replaced I got from Midway
 
Last edited:
Regarding those extractor,

I have a 223 dolt faced Rem bolt I want to open a little to 22 Russian size, Will I have to spoil the extractor currently in it and install a new one when the bolt is opened up?

Thanks,

Pete
 
I know I have an extractor for a Remington 700, not sure I have the rivet. If you want the extractor send me your address and it’s yours. If I have the rivet I will send it along too.
worst case you will have half the parts. If I remember correctly there is also a special tool you will need for staking the rivet.
Went out to shop and checked, I have 4 extractors 2 for large bolt face 2 for small bolt face, which do you need? I do not have the rivets. Let me know what caliber the rifle is and I will send you the correct one.
Just checked brownells the rivets and extractor are in stock! Offer still stands if you want the extractor let me know that saves you about $35.00.
 
Last edited:
PM sent

Riverwolf1 said:
I know I have an extractor for a Remington 700, not sure I have the rivet. If you want the extractor send me your address and it’s yours. If I have the rivet I will send it along too.
worst case you will have half the parts. If I remember correctly there is also a special tool you will need for staking the rivet.
Went out to shop and checked, I have 4 extractors 2 for large bolt face 2 for small bolt face, which do you need? I do not have the rivets. Let me know what caliber the rifle is and I will send you the correct one.
Just checked brownells the rivets and extractor are in stock! Offer still stands if you want the extractor let me know that saves you about $35.00.
Click to expand...

Thank You,

Pete
 
Thanks to everyone for the replies.

Riverwolf1, you have indeed made a generous offer, but I would like to pay you fair market value.
 
You must log in or register to reply here.
Back
Top