Reloading Die Question

H

Harvman

Guest
Gents,
Not near my press at this time and wondering if someone can assist. Looking for accurate dies for F-class for a new caliber selection. Specifically 6mm series and 6.5 selects (6mmBr/ 6mmXC/ 6.5x284 etc.)

Does Redding Dies fit into RCBS Presses?

What other dies fit into a RCBS Press that are accurate for F class reloading in assortment of caliber. Looking for a new caliber and trying to see about different dies to select from...
 
You are looking for the Redding die set that contains a micrometer seating die, S-type bushing neck-sizing die, and a body die. A FL S-type bushing sizing die with the micrometer seater is an alternative. Your preference.

Unless you're dealing with antiques, presses and dies are 7/8" x 14 tpi. Shell holders are also universal.
 
Last edited by a moderator:
My suggestion is a custom set of dies made from three fired cases from your chambers. This will give you perfect re-laoded ammo. For this I recommend you get in touch with the following link. http://www.neiljones.com/


I know this may sound crazy, but if you have your own chamber reamers you never go through new dies again. Same dies for new barrels and chambers.
 
You must log in or register to reply here.
Back
Top