Redding 30BR dies?

T

TrxR

New member
Anyone have a set of Redding 30br dies model number 84524? Its a non bushing fl die, non bushing neck die and seater . Im wondering if anyone knows the neck dimensions of these dies?

Thanks
 
I happen to have the f.l. die #91524 that comes in that set. With a 'plus' ZZ pin gauge, the neck is a snug .3270.

That's one oddball die set for a 30BR.....:confused: -Al
 
Al Nyhus said:
I happen to have the f.l. die #91524 that comes in that set. With a 'plus' ZZ pin gauge, the neck is a snug .3270.

That's one oddball die set for a 30BR.....:confused: -Al
Click to expand...

Thank Al I appreciate you measuring it for me.

That will give about .001 - .0015" neck tension on brass turned to .010" But wont size enough for someone turning to .009" . It will work for now for me to get my brass ready to fire and get it fired a few times then Ill send 3 pieces to Harrells or Whidden for a die.

Thanks
 
TrxR said:
Thank Al I appreciate you measuring it for me.

That will give about .001 - .0015" neck tension on brass turned to .010" But wont size enough for someone turning to .009" . It will work for now for me to get my brass ready to fire and get it fired a few times then Ill send 3 pieces to Harrells or Whidden for a die.

Thanks
Click to expand...

If the sizing is what you want, Jim Carstensen can convert those to take neck bushings. He's done at least a half dozen for me over the years....great work, fast turn around time and reasonably priced. -Al
 
You must log in or register to reply here.
Back
Top