Eric Stecker
New member
Due to the rapidly increasing demand for bullets that we believe is in part a result of the recent election we have decided to discontinue 21 bullets that are slow movers. This will free up machine time for more popular bullets and new bullets that we plan on making. Many of these discontinued bullets were made with jackets that are not used to make any other bullet. As a result these jackets will be discontinued as well. The list of these jackets is below.
As of Monday 11-19-12 we will no longer accept orders for the discontinued bullets. Over the following days we will sort out how many jackets we will need to make the bullets that are ordered. After this is resolved we will know how many of the discontinued jackets we will have in stock. At that time I will announce which jackets (and quantities) will be available for purchase. Once these jackets are sold they will no longer be available unless an order for 100,000 or more is placed.
17 cal .500 long
17 cal .635 long
20 cal .525 long
20 cal .810 long
6mm .750 long
6mm 1.100 long Thick
25 cal .940 long
30 cal 1.080 long
We are not accepting new orders for these jackets if there is no stock available. You are welcome to place an order but if no jackets are available after the discontinued bullet orders are resolved or if the amount of jackets ordered isn't more than 100,000 the jacket order will be cancelled. We simply won't have machine time available to make them in smaller quantities.
It is important to note that we also discontinued the bullet that is made using the 30 cal 1.000 long jacket. In this case, the jacket will not be discontinued because so many of these jackets are used by other bullet makers. It is our desire to keep the other bullet makers supplied and even though a few people use the jackets listed above, the total number for all of them combined is far less than the amount of 30 cal 1.000 long that are used.
Regards,
Eric
As of Monday 11-19-12 we will no longer accept orders for the discontinued bullets. Over the following days we will sort out how many jackets we will need to make the bullets that are ordered. After this is resolved we will know how many of the discontinued jackets we will have in stock. At that time I will announce which jackets (and quantities) will be available for purchase. Once these jackets are sold they will no longer be available unless an order for 100,000 or more is placed.
17 cal .500 long
17 cal .635 long
20 cal .525 long
20 cal .810 long
6mm .750 long
6mm 1.100 long Thick
25 cal .940 long
30 cal 1.080 long
We are not accepting new orders for these jackets if there is no stock available. You are welcome to place an order but if no jackets are available after the discontinued bullet orders are resolved or if the amount of jackets ordered isn't more than 100,000 the jacket order will be cancelled. We simply won't have machine time available to make them in smaller quantities.
It is important to note that we also discontinued the bullet that is made using the 30 cal 1.000 long jacket. In this case, the jacket will not be discontinued because so many of these jackets are used by other bullet makers. It is our desire to keep the other bullet makers supplied and even though a few people use the jackets listed above, the total number for all of them combined is far less than the amount of 30 cal 1.000 long that are used.
Regards,
Eric
Last edited: