CZ527 trigger

S

Stan Pollak

Guest
I'm trying to replace the trigger on my CZ527 American-it doesn't adjust much below 4#. On the Midway site there is a listing for the 527 set trigger-which mine appears as, but is not. All the other listings by CZ state-"S/S"(single stage). Is their (midways') listing a compatable replacement for my trigger? Stan-share your sport:)
 
s/s trigger

the 527 comes with a single set trigger. to work it simply push it forward. it will have a very light click. this sets the trigger. if you look just infront of the trigger there is a small set screw that allows adjustment on the set trigger. i suggest dry fire it a few times with the trigger set as mine is very light compared to an unset trigger. hope this helps.

gary
 
midway

call midway there tec. support will answer your quiston
 
I removed the set trigger stuff from my 527, and fiddled with it some to get it down to about 2 lb. Not the greatest, but it's clean and crisp. Being old and set in my ways I'd forget about half the time, maybe 3/4 of the time, to set the trigger, so.... :D
 
CZ527 set trigger

Hey guys-thanks for the info-just tried it and it breaks just under 2#. I didn't see anything in the instructions-probably need to read them a little closer-thanks agin-Stan-share your sport:)
 
You must log in or register to reply here.
Back
Top