V
vicvanb
Guest
What problems would result from using a 9.3X62 neck sizing die and bullet seating die for reloading 9.3X64 brass?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
I really don't know but if the only difference is 64 vs 62, and I had some dies, I'd give it a try and see. Doesn't sound like much difference.
Found this (Avast believes there's a problem here):
http://www.longrangehunting.com/forums/f19/9-3x62-vs-9-3x64-11532/
Found this (Avast believes there's a problem here):
http://www.longrangehunting.com/forums/f19/9-3x62-vs-9-3x64-11532/
Last edited:
V
vicvanb
Guest
I do believe the 64 case is a larger size, IIRC, head size and body
The difference in case head size is 0.031 inch. There should be enough clearance in a 9.3X62 neck sizing die for the 9.3X64 case to enter. Not sure about the bullet seating die?