E
elmersquirrel
Guest
I have a high wall built in this caliber. Can anyone shed light on its viability. I also have loading dies and cartridges. Thanks for your help.
Butch Lambert
Active member
Call Dave. He is on a short vacation at the moment I think.
Bill Gammon
New member
The AA was built on the 30-30 case, but call Dave.
Lee Martin
Active member
+1 on getting a hold of Dave Tooley. I have some 6mm American cases formed from .30 American. The .30 American was just .30-30 Win with a small primer, done on high quality Federal brass. Most guys turned the rim and cut an extractor groove so they'd work in .308 or PPC bolt faces.
-Lee
www.singleactions.com
-Lee
www.singleactions.com
Lee Martin
Active member
Steve Kostanich
Active member
The 6mm American is very similar to the 240 Coyote #2 cooked up by Harold Broughton back in the '80's.
That case's capacity is very close to a 6BR, except it is smaller in OD and longer.
I put a Coyote together in 1984 when the big PPC brass shortage was on. I have had sporadic periods of greatness with it, but usually prolonged periods of mediocrity. So much for trying to beat the PPC.
FWIW
Steve Kostanich
That case's capacity is very close to a 6BR, except it is smaller in OD and longer.
I put a Coyote together in 1984 when the big PPC brass shortage was on. I have had sporadic periods of greatness with it, but usually prolonged periods of mediocrity. So much for trying to beat the PPC.
FWIW
Steve Kostanich