6.5 creedmoore

N

NIKHUNTER

Guest
Good evening.

I'm running a 6.5 creator, barrel 24 "step 1: 8. I tried several refills from the imr 4350, swissr62, vihtovuori n 150.l: I tried with different doses of n 150 (35gr.-35.5-36-36.5 -37-37.5) hornady balls eld match 147, sierra 142 gr.match.




the last best rosata I had with the 150 n. 37.5 gr.n 150

, hornady ball eld-match 147 gr.

- 5 tenths from f.bore:

velocita'793-796-805-792-790.

I would like to ask you for some advice.


The speeds seem fairly constant but have a slight difference. From the picture I have attached you note a shot higher up.Probably the one with the highest speed.

It would seem that I was getting close to the knot of the skein. What do you recommend? still approaching the free bore bringing me -3 tenths or begin to raise the dose of a wheat?

Thank YOU for your answer.

Yours sincerely
 
NIKHUNTER said:
Good evening.

I'm running a 6.5 creator, barrel 24 "step 1: 8. I tried several refills from the imr 4350, swissr62, vihtovuori n 150.l: I tried with different doses of n 150 (35gr.-35.5-36-36.5 -37-37.5) hornady balls eld match 147, sierra 142 gr.match.




the last best rosata I had with the 150 n. 37.5 gr.n 150

, hornady ball eld-match 147 gr.

- 5 tenths from f.bore:

velocita'793-796-805-792-790.

I would like to ask you for some advice.


The speeds seem fairly constant but have a slight difference. From the picture I have attached you note a shot higher up.Probably the one with the highest speed.

It would seem that I was getting close to the knot of the skein. What do you recommend? still approaching the free bore bringing me -3 tenths or begin to raise the dose of a wheat?

Thank YOU for your answer.

Yours sincerely
Click to expand...

no pic?

also, high shot rarely "fastest bullet"
 
i can not.help me?
 
Last edited by a moderator:
This forum is very kludgy right now

Down below about 6" (15CM) is

ATTACHMENTS
manage attachments

If the pic is on your computer you should be able to click on "manage attachments" and attach it
 
excuse me.i find .
 

Attachments

  • IMG-20180517-WA0003.jpg
    IMG-20180517-WA0003.jpg
    258.5 KB · Views: 170
got a BENCHMARK cane. I'm running the BREAK IN. I only shot 50 shots.
The shells used are the HORNADY LARGE primers.
IN Italy It is still quite unknown and therefore finding the news is difficult.
The INTERNET and various American sites are giving me some information.
I need valid advice in any case.
I see that some brands of casings use both SMALL and LARGE primers.
Using various charges with different powders gave me an extension of the different casing.
I read to bring the casing length to 1.91 "with TRIMMER. A format casing.
As for the HEADSPACE would be to be calculated with the inert shutter and still have not been able to run it.
At this time the casings have different HEADSPACE and to uniforme them for the tests I bring them to 1.56 ".
I ask kindly news.
Thank you.
 
You must log in or register to reply here.
Back
Top