30 br trajectory

[nik]

ok so does anyone know were i can find a trajectory table for the 30 br im looking at getting a barell for my encore but cant decide 30br 7mm br or 6.5 br

 

[glp]

not really but maybe this will help

ok so does anyone know were i can find a trajectory table for the 30 br im looking at getting a barell for my encore but cant decide 30br 7mm br or 6.5 br

my 30BR with 112-118 gr bullets at about 2950 fps, zeroed at 100 yds, needs about 10-12 inches elevation at 300 yeards over the 100 yd zero depending on temp and air density.

 

[abintx]

nik ...

I just took a hard look at all aspects of the 30BR the last couple of days. Here's what I found: http://www.6mmbr.com/30BR.html.

 

[Joe]

At 3050 fps I need and 115 Eubers with a 100 yd zero I need:
23 1/8 min clicks at 300 yds
68 1/8 Min clicks at 500 yds

 

[Curt N]

greg

10-12" from 100-300 yds?, I think you need more powder 1" from 1-200 yds 2" from 2-300 yds. curt

 

[nik]

thanks guys my other question is what would be the best way to get brass

 

[nik]

or rather make brass

 

[goodgrouper]

ok so does anyone know were i can find a trajectory table for the 30 br im looking at getting a barell for my encore but cant decide 30br 7mm br or 6.5 br

A 30 br would be the most efficient in a pistol length barrel of the three but your choice should be made on what you're going to use the gun for mostly.

Brass is a cinch. 6 br lapua brass run over a mandrel of the desired size.

 

[glp]

Curt...

10-12" from 100-300 yds?, I think you need more powder 1" from 1-200 yds 2" from 2-300 yds. curt

3 inches from 1 to 3 is 3x3=9 inches of actual hold over at 300 vs 100....I must be shooting an old slow lot of H4198!

 

[abintx]

nik ...

thanks guys my other question is what would be the best way to get brass

Here's where you go for the best price on 6mm BR Lapua brass you neck up to 30BR: http://www.brunoshooters.com/