0.268 neck---6ppc Shooters

C

C.L. Peterson

Active member
What neck diameter bushing is used for re-sizing case 0.268 necks?
Do you change bushings for powders (ie: LT-32/N133)?
Do you use a lighter grip on the bullet than when shooting 0.262 necks?
Thanks for replies.
CLP
 
Doc,

I turn to 11.0 and use 263 bushings w 2430 bullets. Have used 264 if it feels a little snug on new or annealed necks. Only use 8208.

Mark
 
C.L. Peterson said:
What neck diameter bushing is used for re-sizing case 0.268 necks?
Do you change bushings for powders (ie: LT-32/N133)?
Do you use a lighter grip on the bullet than when shooting 0.262 necks?
Thanks for replies.
CLP
Click to expand...

Doc, all this changes even in a given match day. Many of these variables are interdependent of each other .


For example, with a 0.262 neck the neck tension varies depending on jam or jump, etc. Some of the hot shooters even change 0.005" bushing squeeze and get improved results. Its much a matter of who can outguess the others.

These now required mid teen aggs require very minute changes.

But you already knew that.


.
 
You must log in or register to reply here.
Back
Top