Search results

Thanks for the reply!! I only shoot it in my gun clubs matches which aren't sanctioned.

I have 4 bricks of Eley Tenex Roundnose WN1643 that shoots well in my rifle. It is old and getting white fuzz on the bullet lube. But it still shoots well; I shot a 248 - 16X with it last week in switchy conditions. I would like some advice on whether to keep shooting it with the white fuzz or...

Mike's Bullets Attached is the bullet and even the same lot number that Mike shoots. Ralph Stewart and I talked Randy into making that bullet for our 30PPC's about 6 years ago. Randy made some prototypes and sent to Ralph and I to test. They shot better than anything we had tried before. It...

Polishing throat! Wayne, I think you'll notice a profound difference in the first shots amount of coppering on that barrel! In fact I think you'll find that a breakin regimen isn't even needed!

Polishing Throats I've been polishing all my throats after chambering for the last 5 years and have found it eliminates the need for a Barrel breakin routine!! I use the VFG felt pellets and Brownells Abrasive Compound 400 Grit Silicon Carbide #083-045-400 The very first 15 rounds shot on...

Seb Neos Rest Larry, Get on the list with Ernie! Ernie Bishop 306 West Flying Circle Drive Gillette, WY 82716

Think I've got a perfect Case Setup for New Neos Rest! I did a lot of research on available cases to hold and transport my new Seb Neo Rest. My requirements were: 1) Had to be large enough to be able to comfortably accommodate Neo Rest with base assembled. (didn't want to have to...

WOW! I ve had Farley Gen 1 and 2, Seb Gen 1 , and even a Seb Max Rest! I gotta say this new Seb Gen 2 Neos Rest is the finest piece of equipment I've ever seen!!!!! Absolutely blows away all my previous rests except for the Seb Max which was great but too big and heavy for my needs! My rest...

Thanks for the Feedback! I really appreciate all the responses to y post it's giving me some much needed feedback! What I take is that Nightforce didn't do the best job on reticle selection and the eye relief is short! Thanks Guys!

Re: abintx Post abintx, Sorry I just misspelled name cause I'm definitely talking about the $2200 Nightforce Competition with CTR or DDR Reticle! abnormally high amount of them for resale compared to the number out there!!! Thanks for all posts!

I'm just wondering why there are so many New or nearly New Niteforce Competition Series Scopes being listed on these and AccurateShooter.com Classifieds?????:confused: It is a new offering and clearly designed to compete with the Leopold Competition Series and the various March varients. The...

Neo Features Wanted Hi Seb! I have been an avid supporter of Your rests since I got my first one direct from You in Indonesia back in 2006! It's primary use has been Nbrsa and IBS 100& 200 yd matches. I was fortunate enough to win a lot of trophys and plaques with it in 2007, 2008, & 2009! Back...

I realize these matches are in two different regions but they are close enough together that some kind of coordination of dates would seem to make sense.

I'll try and make them All!!! We had 9-12 shooters at most of the shoots we had last year! Hope we can do even better this year. Esten Spears

Can I still sign up at Noon Friday? The paperwork I received says signup ends Thursday I can't make it till noon Friday. Will that be OK? Whendoyou expect to draw for benches? THANKS! Esten Spears

Bartlein 0 to 13.5 Twist 6PPC Barrel Haze, I may have confused you with the 6" zero twist rate section. The 6" is just the amount to be cut off the barrel blank plus the distance from the end of the finished barrel to the throat. (about 1.75" on a 6PPC) Just think of it this way; The bullet...

0 to 1:13.5 Bartlein Barrel Rustystud, The Throat will be at 0 twist rate but the twist will start increasing within .5" of forward travel. Remember I said the twist starts increasing 6" from the rear of the barrel BLANK and I'll be cutting off the rearmost 4". Then, on a 6PPC, the throat is...

0 to 13.5 Twist Barrel Jackie, That 0 to 13.5 Twist Barrel Frank spoke of is the one I ordered and am anxiously awaiting. The Twist will go from 0 to 1:13.5 in 20" Length but not start for the 1st 6" of the Barrel Blank. That will allow me to use my STD 21.8" bbl length and have the throat at...

Centerfire Benchrest in FL Kav, I haven't met you but you seem to know some of my Texas Friends. I am in Ocala and shoot both NBRSA Group and IBS Score matches. Unfortunately the matches are a ways south of me and would be a pretty good haul from JAX. Manatee Gun Club at Bradenton, Lakeland, &...

My new lathe came with a coolant system so I incorporated a GreTan Muzzle Flush Attachment and got some Oak 700 (Same as Valcool 700) Water Soluble Oil Coolant. I mixed at 10:1 instead of the recomended 20:1 Water. The new system worked great so far as flushing chips from chamber reamer but it...