Search results

Sundials.

PTG having issues? Tell me it ain't so!

Swab the inside of the necks with this on a Q-tip. https://www.amazon.com/Bullet-Reloading-MOLYBDENUM-DISULFIDE-Powder/dp/B00WP082IU/ref=sr_1_3?dchild=1&keywords=Powdered+moly&qid=1619984615&sr=8-3

I didn't realize it either!

All done by feel or you can spring for this bench mounted priming tool. http://www.primalrights.com/store/index.php?route=product/product&product_id=134

I don't turn big lots either, last was 100 220 Russians. When you look at the whole process the hardest part is turning a caliber specific mandrel, then a spud to push the case onto the mandrel and maybe the coupler to pull the case off of the mandrel or use a 21st Century case holder as shown...

Don't get to enamored with his fancy fixture, just turn the brass using the technique up to 3:34 using the tailstock to insert and remove the brass from the mandrel. You can make the insertion/removal spud that he made for the fancy fixture but put them in a drill chuck in your tailstock.

Another video turning necks on a manual lathe. Gent shows a slick coupler to remove turned brass from the mandrel in the chuck. https://www.youtube.com/watch?v=haTunbUJkjo&feature=emb_rel_end

A better question would be "who the hell cares?"

The gun is an AR-10 6.5 Creedmoor that I put together for the granddaughter when she was 12. My son hunts with a Tikka Lite in 6.5 CM so when she became interested in hunting she shot the Tikka ONCE. I put together the AR-10 knowing that being a gas gun, it would soak up a good bit of the recoil...

Granddaughter is 13, grandson is 12.

Lovely young lady! Glad to hear that the family came together and celebrated her. Those are the memories that will ALWAYS bring a warm smile to everyone's face. Good on ya grandpa!!!

Good god man, if she had to use a billboard to show your manhood you have absolutely nothing to fear regarding the coronavirus!! :rolleyes:

Couple of months back I was trying to figure out why a pancake compressor I was given wouldn't run. Pulled everything apart, AC cord checked out okay, contactors did also as did the pressure regulator switch. Put the motor in my vise to see if it would run, as it was an aluminum framed motor I...

I still like my AMP!!!

I discovered that my Labradar would not pick up shots unless it is placed adjacent to the muzzle of my rifle which has a 28" barrel. Needless to say the muzzle overhangs the bench tops at my local range so I put together this mount that allows the Labradar to overhang the front of the bench by...

So what's the problem?:D

Draw up some plans, make them as plain or fancy as you wish then visit a sheet metal shop.

My pleasure sir!

Nah, I heard from the Pope that he could dial in the die/screw in his 4 jaw in a matter of seconds!