Search results

Tony, during the match in Midland, I had a chance to take a closer look at a second generation repeater V22, the bolt is a two lugs and totally different than the V22S bolt, not interchangeable at all. My traveling friend was shooting his V22S with still the crescent pin and had several FTF...

Just got back from Midland, the wind conditions were horrible, from 25 to 30 mph. Congratulations to Larry Parsons, Texas State Winner, but to show how bad the wind was, his high card score was 1900-5x and total score 11050-39x I was lucky and came in second with a total score of 10900-37x...

TKH I only had one repeater action in my hands to rebarrel, and made it into a silhouette rifle, that was about a year before I started to mess around with the single shot actions, and never paid attention to what the action looked like, but I do remember now that it was easier to chamber than...

The first 4 actions that I got, they all had the crescent style firing pins, at the time I had several conversations with Mike B. about the FTF problems, he then sends me some replacement pins again with the crescent tip but in a different location, they did not solve the problem. Later in a...

Maker's Mark, Angel's Envy, Woodford Reserve.

I don't blame Luke for quitting that job, I have been at the Mesa test center, and it is the most boring job that I can think of. Once you mount the rifle in the fixture, all you do from then on, is open bolt, load round, close bolt, pull trigger, and look at the computer screen. You do this...

Jim, sorry to hear that, was not aware. Thank you for your service. Evelio.

Hey Jim, What do you mean you can not be competitive at 78, hell I will be 79 in January, and still shoot 4 matches a month, and feel very competitive, hell sometimes I even win a few, and still working on guns 6/7 hours a day, and enjoying every minute thanks to god. Don't ever give up. Good...

Tony, the reamer that I use when the customer ask for a Nevius chamber is a PTG Bill Myers reamer, same as the Nevius reamer, is a tapered reamer with no stop, but I have a micrometer stop on it so I can control the depth one thousand at the time. I have it set to when I insert a loaded Lapua...

All the ones that I build have the crescent style pin. In my personal opinion the large impact area of the present crescent pin configuration is the reason for the FTF and possibly an inconsistent ignition.????? Evelio.

I heard he replaced the striker pin in the firing pin with one like the 2500X Evelio.

Well as far as the springs, I am using the 15 lbs. spring with no FTF , and very consistent indent in the case. Besides that, the more I shoot it, the more I like it, specially how easy it is to operate the bolt, just like butter. Now to be honest ( MB may not like this ) but if you open the...

You are correct, out of the 5 I already build, 4 of them are for guys with very little experience in benchrest, and they only shoot local ABRA matches, Myself and a couple of other guys will start shooting ARA matches, but still local matches within 4 to 5 hours drive, maybe sometime will make...

Cheryl have changed several reticles on scopes for me, last one was a Weaver about a month ago. Turn around time is about 30 days. I highly recommend her. Evelio.

Try OPTICAL SERVICES 915-740-4290 Cheryl Ackerman.

Tony, nothing special about the Vudoo actions, the only thing that call my attention, is out of all 3 actions after swaping bolts in between all 3 of them, there was only .0005" difference in the dimension taken from the face of the action to the face of the bolt where the back of the case fits...

A=.2252 B=.2248 C=.600 1.30* Evelio

I am not a factory coordinated builder, I have no affiliation with Vudoo, M.B. just happened to mention my name as presently building a couple. There is really nothing special about building one. There are several other good gunsmiths out there that can easily build this rifles, and make them...

Again, WOW & WOW that is a hell of a fantastic custom job. That action sleeve looks like a copy of the 2013 action but made to fit over the 1913 action. I did not meant to dispute the fact that it was build my Myers, I am thinking that he probably re-barreled the action, and did his magic to...

WOW, I have worked on hundreds of Anschutz match rifles, and have never seen one where the action have been sleeved, looks to me like you have one of a kind. Whoever owned that rifle before you went to the extreme to make it shoot. I am sure that Bill Myers did not do the extra work on the gun...