Search results

just curious on a stock rifle and if it can shoot better without a build. He barreled and AI the chamber.

Hey fellas I have a couple of sporter rifles for hunting, a Winchester M70 .30-06 and a Remington 721 .270 Winchester. The M70 I bedded free floated barrel, left the trigger alone, have a Redfeild Accutrac 3-9x40, Shoots really good after some improved handloading. Got rid of...

when you say basic... rebarrel, true action and bolt, better stock, custom chamber and dies ? Without being a benchrest shooter other than my sporter hunting rifles at modest ranges, 300 -400 yards, my Redfeild accutrac/range scopes can dial to 600. The furthest deer was at 300 yards, maybe 400...

as long as you're doing small caliber and you make sure you're set up good, otherwise no.

what's it made out of?

I use a chamber/recess lug brush myself.

ok... so.. in that case I just measured a fired .223 case and the neck OD is .255. That's quite a bit to turn. Don't rememeber what the OD is after sizing, but Look into a bushing to size what you need after uniforming the necks ? Maybe someone else can chime in with more experience.

don't know about this guy but I had to remove the spacer out of my Win M70 mag well. The only sporter I have with a long freebore is my Weatherby.

I doubt you have a tight neck in your chamber, but hey what do I know ? How do you know for sure it's tight ? I am assuming the rifle is a 722. In that case 99.9% it doesn't have a tight neck. You have no soot on the necks after firing ?

Neck tension and bullet seating make a huge difference with my .30-06. I also bedded the action too. Rest and shooter is part of the equation, but the first two are where I would work on. Anneal, Redding body die(bumping shoulders checking from a fireformed case with a stripped bolt) /Lee collet...

I've been told by some to make too many multiple passes over Mandrels to uniform necks. I used mandrels to experience no difference using a Lee neck collet die and a few passes cammed over after annealing. Since this site is a "benchrest" site, I'm sure the feed back about necks and custom...

well I was a little disappointed when I peered inside the sleeve (which Forester sent me recently) to see a rough unfinished shoulder, but the bullet guide is good, and the dimensions in the sleeve are good so I suppose the shoulder isn't that critical. Benchrest guns aren't my thing.

Hey Fellas Recently I found a PDF link from Forster about stem adjustment for bullet depth for thier chamber sleeve seaters. It's pretty spot on, but wasn't paying attention to the amount of turns I did. I had a dial indicator on the top of the stem before I found the link. I...

Nah.... I had a few here and there, last time just two, out of 40, but with the spacer it took care of it. Over the years I had trouble no matter what brass I used. I shouldn't post here until I figure things out, sorry. Lee's stuff isn't consistent, and a rep from the factory said that too...

explain to me anyone who knows these dies well and had to alter them to make them deal with brass that doesn't size consistently with most in a batch. I read a forum members explanation on a different forum who said place a washer over the case in the shell holder to keep the mandrel away for...

Doesn’t sound like it really matters then, does it.

I don’t see any scratches in my barrels, so l cant go along with you. A 10 power maginifier is clear enough to not see any damage at the crown. And you have to realize the brush isn’t touching the bore either, so what’s the problem? If You want to over analyze things be my guest. I had a bore...

Olive Oil Just be careful and watch what you're doing. Done it numerous times and my rifles shoot well, very well at that. Thing about how button rifling is installed, so saying it's not good for the bore is just plain nonsense. I don't make it common practice coz it's not needed, just rifles...

Alot of people just say things but doesn't necessarily mean anything, other than you said it.

old thread but..... Steel bore brushes are made to clean, well, bores. I use them when I have carbon build up. I don't go crazy, just watch as I brush and not go to far. A few passes with hoppes and it's gone.