Search results

yes_ it is... . The die is hardened and ground. Made out of tool steel. The bushing is made from the same material.? My bushings are honened to size. Tolerances are held to .0005" or better. You can send a case or print and or also a reamer. These items I can measure off of.. My main die...

full length die I would like to add, I build a full length die. The shoulder and base are ground to your specs. I also include a neck/shoulder bump bushing. Price starts at $138 plus shipping.

Thanks Dusty!!!! Oh and by the way, Dara carries a pistol! Great person. Miss shooting an air pistol at noon, after I ate. Mark

I looked at the site I see were your going with the pins. Having pins that are .0001" increments are perfect for fitting the barrel. Didn't know they made them in that close of increments.

What about over all lenght? My gage pins are about 2.5 long..

How long are Del Tron pins? Never used them, myself... They look just like gage pins... Are you using a "Plus" size, "On" size or a "Minus" size? I have a sets of Plus and Minus gages that I use. Mine all come from Vermont Gage. One set of China gages. They were cheap at the time. Mark

Something I use http://www.travers.com/33781-57-004-165?Category=UserSearch=thread%20wire%20holder These will handle all kinds of thread wires and attack directly to your mic. Mark

The words " Grind it straight" I'm referring to taking the taper out of it,nothing more. It's a cheep way to try something different. Mark

If you would like to try something a little different. Send me your rod and I will grind it straight. Then you can try the Getters method. $12 plus shipping. Just a thought. I grind the rods on a Crystal lake grinder. The pilot area won't be touched. Here's a picture of my little grinder...

They have gone bankrupt and sold off everything... Does any one have a inside knowledge on this subject?

Do any of you own stocks in these companies??? 401k's... etc. You have a say every year and it goes back to VOTING. I use to own Ruger stock and a couple others. As a former share holder, I will say, that companies owe it to the share holders to make money. Hostess is a great example of the...

What size are you looking for?? Might know someone, located close to me, That could do it. The steel would be 4140 material. Mark 989.385.0173

Their is no such thing as a Copper penny! Get some copper tube and only use it if you have a burr. Pennies are made of Zinc. Also how are you holding onto the reamer? Not with a cheep floating reamer holder....

What is the bore hole size in relationship to the pilot size of the reamer? If it's a couple thou different, you get chatter.

Would anyone have a picture of this die? I have an idea for a die and don't wish to step on toes. Mark

Can't say I've ever held a Neil Jones die. Most people won't let you take them apart. The body is hardened and ground with a light polish in the ID. I like to get brass form the customer so I can match the taper of the case as close as possible. The bushing are either hardened or soft. Price...

I might have a die that will work for you that's on the shelf.. It's a die that re-sizes the body. The neck bushing re-sizes the neck and bumps the shoulder. The neck size is customer specific. You want a .336" diameter, not a problem. I can send a picture or post a picture of my current 6mm BR...

Would you post a pic Of the lathes? Like to see if the southbend is like mine. Mark

Call Dick Triemstra to get a good lathe. As for American made Lathes Rockwell is a good lathe. They stopped making them in the late 70's. M

Dick Triemstra has lathes. A nice Rockwell 11" is a great lathe.313.366.1060. He does deliever.