Search results

For a small fee Dan will convert your Remington to a BMW. Nat Lambeth

Buying a bore Scope Lee: If you can wait until the Shot Show you can get the best deal available. There is a rifle smith package 21" scope with right angle sleeve, 11" with right angle sleeve, 90* eye piece, two light sources, hard case, cleaning goodies. Both of these units will focus and...

Question about barrels Bill B: Was the original Broughton barrel made prior to 2005? Wasn't Dan Muller working/making Tim North's/Broughton's barrels during that time period? I have reason to believe Dan Muller worked for Broughton from 2000-2005. Nat Lambeth

Spelling of Clemson Bill is it true, the "O" and the "N" in "CLEMSON" stands for "honor and "knowledge"> That is what is told around the other parts of the ACC. Nat Lambeth

Spring loaded center Why Jerry, let the "Grasshopper" learn what he needs. Nat Lambeth

Bipods at 600-1000 yds There are a number of very good Bipods out there now. I own two Harris bipods and only use them on hunting rifles now. I have two Center Shot Bipods and they work well. There are some who prefer the Duplin or Rumple because they are all metal. There are some who prefer...

Seb neo arrived today Thank you SEB and Ernie. The wait was worth it. I ordered my rest March 2012 and was given an approximate delivery date of July 2012. I was told I was 40th on the list and they would call when a rest was available. In March 2013 I e-mailed SEB and he said I was 7th on the...

Emgraving Barrels My Pantograph has a mechanical peg board to hold part to be engraved. I made pillars to hold the barrel in alignment with the board. Nat

Seb rest Got a call from Ernie Bishop tonight. My rest has come in. I will send him a check in the morning. I am very excited about getting the rest, it has been ordered for over a year and half. Nat Lambeth

Mistakenly anouncing the pilots name wrong... One of the comments under the FOX retraction.. "Sum Dum Ho" referring to the news anchor.. Nat Lambeth

Palma and F-Class The only thing Palma and F-Class have in common today is Palma and FTR are limited to 308. The Palma (International) is limited to 155 grain bullets. They shoot 800, 900, 1000 yards with Iron Sights, in a hand held rifle with a sling. The new Palma shooters use 30mm front...

Another consideration if you are going to turn faster than 200 RPMs You might want to take your center bearing/cathead and have them balanced in a motor balancing shop. You don't need any unnecessary vibration. Some companies will come to your shop and balance your equipment on site. Nat Lambeth

Before and now.. I use to not anneal at all. Then I began annealing after 6 or 7 loadings. After buying a Bench Source annealer I started annealing every 3-4 loading. Now I am annealing everytime I reload a case. Butch All your .223 brass was cleaned (again) full length sized, trimmed -.010"...

Chambering time.. I built my flush system in 2005. Prior to that I did my chambers lube, ream, and clean, lube, ream, and clean. I was doing gunsmithing part time and had a full time job. For the last 8 years I have chambered between 200 and 300 barrels per year. 1. Now, I clean, inspect...

Tread Lube You can buy all the antiseize you want, but nothing works any better than high temperature bearing grease. Anti Seize has very little anti corrosion properties, and tends to dry up over the years. Your action will never get hot enough from use to melt the high temperature bearing...

Magazine boxes for Winchester model 70s To the best of my knowledge, Winchester only makes one action length. There are at least 3 variations of magazine box. 1. Is medium length with a spacer inside it for shorter cartridges 22-250-308Win. 2. A long box for the 30-06-375 H&H mag, lenght...

Inexpensive Protractor Here is a picture of an inexpensive Protractor. Let us cut out the personal insults go wreck your own threads. Thank You Nat Lambeth

Protractors The protractor I used cost less than $15.00. I have seen them for as little as $6.95. You might find one on e-bay or at a flee market for a $1.00. Nat Lambeth

First, I want to say that Wilbur's Bench Rest Central Web site may have the largest collective group of shooting/machinist intellectuals. We all enjoy shooting and sharing our ideas for the rest of the web site community. We all may not agree on the methods but we all agree on the results...

Muzzle brake clearance.. A few years ago there was a study done and the average accuracy was best at .020" over bore diameter. Doing the math this is just over .010" clearance. Accuracy deninished on tighter or looser brakes. Nat Lambeth